Alcolock 95-000425 캘리브레이션 매뉴얼 - 페이지 3

{카테고리_이름} Alcolock 95-000425에 대한 캘리브레이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcolock 95-000425 8 페이지. Alcohol gas standard

CAUTION!

• It is recommended calibration be done indoors, in a service facility, by maintenance code or

using an ACS download station

• This calibration guide is intended for use by trained technicians only

COMPRESSED GAS SAFETY

• Damaged or broken valves can turn a canister into an unguided missile. Attach the valve in a

safe location

• Calibration should be performed indoors, in a service facility, where the gas standard cylinder

can be properly stored

• Transportation and storage of compressed gases in vehicles is dangerous and should be

avoided

• Examine the canister and valve for any damage, and the expiration date on the label

• Observe all cautions and safety warnings found on the canister

• Never remove or alter canister labels

• Never modify the delivery tube in any way

• Always remove the valve and install the protective cap on cylinders when not in use

• Store cylinders in a cool, well ventilated area away from sources of heat

EQUIPMENT

• 130 PPM (0.05 g/dL) alcohol gas standard, ACS #95-000425

• Regulator valve assembly (6 L/min flow rate): ACS #94-000225 (trigger);

ACS #94-000226 (push button)

• V3 download station, ACS #79-006111

CYLINDER SETUP

Remove the protective cap and screw the regulator valve to the canister. Attach the rigid delivery

tube. Continue to the next section.

CALIBRATION MANUAL