ALcom AT6128 사용자 설명서 - 페이지 8

{카테고리_이름} ALcom AT6128에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALcom AT6128 14 페이지.

Setting PABX code

1. In on-hook state, press and hold DEL key for 3 seconds to set PABX code, LCD displays

SET PCODE - and the "-" flashes.

2. Press UP/+ or DOWN/- key to set PABX code from 0 to 9 or -.

3. If choose "-", it means no PABX code has been set.

4. Press SET key to confirm and exit.

Setting Alarm Clock

1. In on-hook state, press ALARM/P key once, LCD displays 12-00 AL1,

2. Press UP/+ or DOWN/- key to select ON or OFF. LCD displays "ALM" icon when the alarm is

set to ON.

3. Press SET key, value "12" starts to flash.

4. Press UP/+ or DOWN/- key to set the alarm hour and press SET key to confirm and enter

alarm minute setting.

5. Press UP/+ or DOWN/- key to edit alarm minute and press SET key to confirm and go to next

group alarm clock setting.

6. Repeat the above steps to set additional alarms.

NOTE: The first 3 groups alarm clock setting will be repeated periodically every day while the last

2 groups alarm clock setting are effected once.

SETTING PAGE NUMBER FOR CALL TRANSFER

Setting paging number for phones connected in parallel.

1. In ON-HOOK state, press and hold SET key, LCD displays EL--

2. Key in " * " and paging number (example * 1 or * 2), use DEL key to edit.

3. Press SET key to confirm and exit.

4. To Remove Page number please repeat step 1 and press DEL.

CALL TRANSFER BETWEEN PARALLEL PHONES

Transferring an Incoming Call to paralleled phones with Intercom

When a call comes pick up handset or press H.F. button from the first unit, then Press " * " and

paging number(1 or 2) that was set in the second unit, and that unit will ring. Pick up handset or

press H.F key on the second unit to have intercom conversation. Outside caller, first unit user and

second unit user will be connected with each other in conversation. First unit user may disconnect

the call so the second unit user and outside caller can continue the conversation or vice versa.

Important Notes

Only incoming calls can be transferred using this function.

Please use same model phones to use the above Call Transfer features. If different

model phone is connected in parallel, page number cannot be set and only can