ALcom AT-5928 사용자 설명서 - 페이지 6
{카테고리_이름} ALcom AT-5928에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALcom AT-5928 12 페이지. Caller id phone
페이지 인쇄NOTE: DATE OFF: Does not allow real time auto adjustment
REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS
Reviewing
In on-hook state, press OUT/X key, then repeat OUT/X to review
Calling back
In on-hook state, press OUT/X key to review the desired number, then press H.F key or pick
1.
up the handset, and the number is dialed out, or
Press REDIAL key, LCD displays PICK UP, press H.F key or pick up the handset, the
2.
number is dialed out.
Deleting
In on-hook state, press OUT/X key to scroll to the desired number.
1.
Press DEL key and the number is deleted, or
2.
Press and hold DEL key for 3 seconds. All numbers will be deleted.
3.
SETTING MENU
Setting date & time
In on-hook state, press SET key, the value for the year flashes.
1.
Press UP/+ or DOWN/- key to edit the year.
2.
Press SET key to confirm and enter the next value month setting.
3.
4. Repeat the year setting step to set the month.
5. Repeat the above steps for date and time setting.
Setting Local Area Code and Long Distance Code
After setting up the date and time, press SET key. LCD displays CODE 0 ----and the long
1.
distance code" 0" flashes,
Press UP/+ or DOWN/- key to edit the flashing code from 0 to 9.
2.
Press SET key to confirm and enter the next flashing code setting.
3.
Repeat the above steps for the rest code setting.
4.
Adjusting LCD Contrast
After setting up the local area code, press SET key, LCD display LCD 08
1.
Press UP/+ or DOWN/- key to adjust the LCD contrast, total 16 levels can be selected.
2.
Press SET key to confirm and exit.
3.
Alternatively in on-hook state, press FLASH/÷ key to enter LCD contrast setting directly,
then press FLASH/÷ key continuously to adjust the LCD contrast.
Setting Alarm Clock
In on-hook state, press ALARM key once, LCD displays 12-00 AL1,
1.
Press UP/+ or DOWN/- key to select ON or OFF. LCD displays "ALM" icon when the alarm
2.
is set to ON.
Press SET key, value "12" starts to flash.
3.
Press UP/+ or DOWN/- key to set the alarm hour and press SET key to confirm and enter
4.
alarm minute setting.
Press UP/+ or DOWN/- key to edit alarm minute and press SET key to confirm and go to
5.
next group alarm clock setting.
6. Repeat the above steps to set additional alarms.
NOTE: The first 3 groups alarm clock will be repeated periodically every day while the last 2
groups alarm clock is effected one time.
out
6
going numbers one by one.