ALcom AT6085 사용자 설명서 - 페이지 4

{카테고리_이름} ALcom AT6085에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALcom AT6085 12 페이지.

GETTING STARTED

1. The unit requires 3 X 1.5V AA batteries. Open the battery compartment cover and insert the

batteries in the right polarity, then close the cover (Proposal using alkaline battery). There

should be time display on the liquid crystal screen after the batteries are inserted.

2. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet of

exchange.

3. Connect the handset and the unit with coiled line.

4. Setting the dialing mode to correct mode according to the directions from your local telecom.

5. Apply for the caller ID from your local telecom office.

6. The usage of the bracket: Synchronously press the two buttons located at the two side of unit

using your thumb. Rotate the bracket to one of the two angles as you prefer.

1. When a call comes, the telephone rings, and LCD displays the seq. number of the call, the

date, time, incoming number and the NEW icon. The NEW LED indicator will flash when

missed called.

2. If the same number is received again, and the previous call has not been reviewed, the LCD

displays REP icon.

When the incoming memory is full, the latest incoming number replaces the oldest number in

the memory

NOTE: For the phone to display incoming number and other information, you must have

an active Caller ID subscription with your local telephone exchange company.

From handset

1. Pick up the handset and talk to the other party.

2. When finished, return the handset to the base.

Switching to H.F. mode

1. When using the handset, press H.F. key and return the handset to the base.

2. When finished, press H.F. key again.

From H.F. mode

1. When the telephone rings, press H.F. key and talk to the caller. For the other party to hear

your voice clearly, speak into the speaker from a distance of 32cm or less.

2. When finished, press H.F. key again.

NOTE:

Generally telecom transmits the incoming message (eg., Caller ID Info) between the first ring and

the second ring. So please answer the phone after the second ring.

From handset

1. Pick up the handset.