ALcom Premium AT6206 사용자 설명서 - 페이지 9

{카테고리_이름} ALcom Premium AT6206에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALcom Premium AT6206 9 페이지. Retro

페이지 인쇄
TROUBLE SHOOTING
Problems
No Dial Tone
Only can receive calls. Cannot make
outgoing calls.
Not able to get through automated
phone services. (Eg. Phone banking
The
phone
rings
interrupted, but dialing function works
well.
Noise during conversation
Phone does not ring for incoming calls
No LCD backlight or it becomes dim.
Most of the mentioned functions fails
Note: Due to continuous product development all features and specifications are subject to change without
prior notice.
For more Information on Warranty and Product Support please call
Alcom Electronics Pte Ltd Singapore - Head Office
Phone:
(65) 68412668
Fax :
(65) 68412628
Alcom Networks Sdn. Bhd. Malaysia - Branch office
Phone: (60) 3-9286 2888
Fax :
(60) 3-9286 3888
Website: www.alcomonline.com
once
then
is
Check if the phone is connected to the line and
ensure the line is functional.Check if the handset
cord 3.5mm plug is inserted is into the base
properly.
Most of the operators adopt TONE dialing. Please
check if your phone is set to TONE dialing
Set PULSE mode only for older type of phone
lines. Please check with your operator for
required setting.
Check if the connector of telephone line is moist.
Check if too many paralleled phones are used
together. Remove or replace some of them.
Check if the wall socket of telephone line is moist
or rusty. Replace accordingly.
Check if the wall socket of telephone line is moist
or rusty. Replace accordingly
Check if RING OFF is selected – Select other ring
melody if the current one is soft.
Check if the batteries voltage is too low - Replace
the batteries (Please don't mix old and new
batteries to use).Check if batteries or leaked and
the contacts are rusted. Try and clean the
contacts before inserting new batteries.
Check if the LCD contrast is set properly – Select
a proper level.
Check if the batteries voltage is too low - Replace
the batteries.
Reset the phone – Disconnect telephone line and
remove batteries, reinstall them after 15 minutes.
- 8 -
Actions