Ergo PrimeCables Cab-PC-08258 설치 매뉴얼 - 페이지 2

{카테고리_이름} Ergo PrimeCables Cab-PC-08258에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ergo PrimeCables Cab-PC-08258 2 페이지.

Installation Instruction

(Subject to actual size

1. Take out the left/right armrest and seat cushion

from the packing box, and fix the armrest with 6

M6*35MM screws.

3. Pull off the knob of the assembled seat cushion,

then insert the seat cushion into the supporting tube

rotating ferrule to fix.

2. Press the button to assemble the seat back

to the support tube.

4. Insert the whole assembled thing into the holes

on the plate of casters, the tighten them with

M6*65 screws.

Function Instruction

(Subject to actual size)

1. W

hen the seat cushion height is not enough, turn

on the seat cushion lift switch to adjust the height.

3. The backrest can be adjusted appropriately.

5. When the casters are subjected to gravity, they

will stop and will not move.

2.Insert the support tube, take out the M6*50 screw

and washer from the screw package, and lock the

bottom of the support tube.

4.The seat cushion can be adjusted by sliding

back and forth.