Alcom Premium ADT1308 사용 설명서 - 페이지 10
{카테고리_이름} Alcom Premium ADT1308에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcom Premium ADT1308 18 페이지. Telephone
페이지 인쇄Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000, but
you are able to change to your personal 4-digit PIN.
Press OK key, then using ▲ or ▼ key to select MODIFY PIN.
1.
Press OK key to confirm, and the display shows PIN?
2.
Enter the existing PIN code for the base and handset by using numerical keys, then press OK to confirm.
3.
If the old code is validated, the display shows NEW PIN, enter a new PIN code (4 digits), press OK to
4.
confirm.
The display shows REPEAT, input the new PIN code again.
5.
Press OK to confirm, the code will be stored with a confirmation tone.
6.
BASE DEFAULT
This function allows the user to restore the base setting to the factory default.
Press OK key, then using ▲ or ▼ key to select BS DEFAULT.
1.
Press OK key to confirm.
2.
The user will be prompted to enter the PIN code, the display shows PIN?, then press numerical keys to
3.
input code (default as 0000).
Press OK key to confirm. If the PIN code is validated all base settings will be returned to the factory
4.
default.
Handset Menu function 4: HS SETTINGS
The user is able to change a number of the settings for the handset to their own individual preferences.
Press OK key and use ▲ or ▼ key to select HS SETTINGS. Then you can do as below.
ALARM
The user can set the alarm on the handset and adjust the alarm settings, to give an alert at a programmed time
of every day.
Press OK key, the first sub-menu is ALARM.
1.
Press OK key to confirm.
2.
Press ▲ or ▼ key to select ON or OFF, selection of OFF will turn the alarm off, and the user will be back
3.
to the ALARM menu, selection of ON option will turn the alarm on , and the user will be requested to set
the alarm time.
After selecting ON, press OK key to start the settings of alarm, "12-00" displayed with "12" is blinking.
4.
Press ▲ or ▼ key to change the hours, press OK key to confirm, use the same method to select minutes,
5.
AM/PM.
After select the alarm time, press OK key, the user will be presented with a further option to select to ON
6.
or OFF to enable or disable the snooze function on the alarm by using ▲ or ▼ key.
Press OK key to confirm your selection.
7.
8.
When the alarm is set, the
Notes:
1.
In idle state, the alarm will ring at very sharp time you have set.
2.
When alarm rings, you can switch it off by pressing any key of the handset.
When a call comes during the alarm it will be terminated.
Re-enter the alarm setting menu option and select OFF.
3.
will appear on the top of the display.
10