AlcoMate premium AL-7000 운영자 매뉴얼 - 페이지 5
{카테고리_이름} AlcoMate premium AL-7000에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AlcoMate premium AL-7000 9 페이지. +/-0.01% up to 0.10% bac accuracy
AlcoMate premium AL-7000에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 설명서 (4 페이지)
페이지 인쇄
Sensor Module Replacement
Please take the following steps to install a new
sensor module.
(VERY IMPORTANT: The
device MUST BE TURNED OFF in order to
avoid IMMEDIATE DAMAGE to the sensor.)
Remove the module by
pulling it straight
back.
Understanding Your Results (BAC Reading)
2.
Your Reading
0.00% to 0.01%
0.02% to 0.04%
0.05% and over
* Drinking alcohol in ANY amount may impair the ability to drive. There is no "safe" level of
alcohol intake before driving. Don't drink and drive.
Note: The maximum reading the device can show is 0.40%. A true BAC of 0.40% or above may result in
the onset of coma or even death by respiratory arrest. A reading of 0.40% may indicate an acutely
dangerous condition, but may also indicate a sampling error (such as liquid alcohol blown into the
device). Please carefully read the Warning section of this manual before operating the device.
- General Information about DUI/DWI -
The legal limit for intoxication (DUI/DWI) is 0.08% BAC across most of the USA. According to the
American Medical Association (AMA), a BAC of 0.05% is enough to impair the ability to drive. You
should never operate a motor vehicle when you are impaired by the consumption of alcohol, drugs or
lack of proper rest.
Insert a new sensor
module in the
original position.
Your Range
Safe* range
Moderate* range
Warning* range
Open the easy-replace
sensor panel.
Make sure the new
sensor module is
firmly secured.
Description
Little/no alcohol intake.
Increased alcohol intake.
Ability to drive may be impaired.
You will see the
sensor module.
Close the easy-replace
sensor panel.
Ready for testing!
5