Ergo EBDSK4 사용 설명서 - 페이지 8

{카테고리_이름} Ergo EBDSK4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ergo EBDSK4 12 페이지. Monitor desk mount

Step 3

Secure the Monitors to Arm Assembly

The tension is preset at 4-5kg.

After hanging the monitor to the

mount, please release the monitor

slowly to prevent it from falling

suddenly

Step 4

Adjust the Gas Spring Tension

Be sure to keep the arm in

horizontal position during

adjustment. Or else, it would be

diﬃcult to adjust the mount or

damage the mount.

1. If the monitor can stay at the desired height by

itself, no adjustment needed.

2. If the monitor rises up, press the arm to keep it in

horizontal position and then use the

Alley key [M] to turn the bolt clockwise("-" direction)

to reduce tension of the arm only until the monitor

can stay at the desired height by itself.

3. If the monitor falls down, lift the arm to keep it in

horizontal position and then use the

Alley key [M] to turn the bolt counter-clockwise("+"

direction) to increase tension of the arm only until the

monitor can stay at the desired height by itself.

13/64in.(5mm)