Alcons LR18/120i 사용자 설명서 - 페이지 8

{카테고리_이름} Alcons LR18/120i에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcons LR18/120i 18 페이지. Compact installation line-array module

4. Rigging components __________________________________________

GRD18B

The GRD18B enables the

LR18i line-array modules and LR18B

line-array bass modules to be flown and ground stacked. The grid can

be suspended from multiple hoist options on top of the grid or with the

central "single pick-point" bar for smaller arrays (all points 14mm/0.55-

in for 1,5T shackles).The GRD18B has a weight of 26 kg / 57 lb and is

certified for a safety-rating of 10:1, for 24 cabinets LR18i, 12 cabinets

LR18B * on the hoist positions on top of the grid.

* (or equivalent weight in mixed configurations)

Rigging manual LR18i Rev. 1.1

GRD18EXTBR

This is a "sliding" extension bar, which can be attached on top of the GRD18, to extend the

leverage capabilities of the GRD18, with larger centre-of-gravity (COG) array off-sets.

With the GRD18EXTBR mounted at the front side of the GRD18, the upward array tilt is

extended; With the GRD18EXTBR mounted at the rear side of the GRD18, the downward

array tilt is extended. The front and rear holes measure 14mm/0.55-in to facilitate 1,5T

shackles. Always use both quick release pins for the GRD18/ GRD18EXTBR connection.