CALEFFI ThermoSetter 1161 Series 매뉴얼 - 페이지 6
{카테고리_이름} CALEFFI ThermoSetter 1161 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CALEFFI ThermoSetter 1161 Series 12 페이지. Recirculation thermal balancing valve
CALEFFI ThermoSetter 1161 Series에 대해서도 마찬가지입니다: 설치, 시운전 및 서비스 지침 (13 페이지)
페이지 인쇄
2
1
Function B - Automatic thermostatic disinfection
2
The 116
xx and 116
curves 1, 2, 3 and 4. When a temperature higher than about 155°F (68°C) is reached, a
by-pass passage begins to open to activate the second thermostatic cartridge (4) which
controls the thermal disinfection process, allowing flow independent of the operation of the
thermostatic balancing cartridge. This allows water flow through a special by-pass port,
opening the flow path up until the by-pass temperature is attained shown in curve 3. If the
temperature continues rising beyond this point, the flow is reduced through the by-pass port
to allow thermal balancing even during the disinfection process. When temperature reaches
closing temperature, the disinfection by-pass port (5) closes to protect the system fixtures
from the effects of excessive temperatures, as shown in curve 4.
Thermostatic disinfection
4
5
3
6
xx series operating characteristic curves for operating mode B are
G (gpm)
Temperature control
Cv
max
(2.1)
Cv
dis
(1.2)
Cv
design
(0.52)
Cv
min
(0.23)
For 1166xx series with 140°F by-pass temperature
and 150°F closing temperature.
Thermal shut-off
6
Thermal disinfection
T
set
Automatic disinfection
C
T (°F)