CALEFFI 5495 SEP4 설치, 시운전 및 서비스 지침

{카테고리_이름} CALEFFI 5495 SEP4에 대한 설치, 시운전 및 서비스 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CALEFFI 5495 SEP4 4 페이지. 4-in-1 hydraulic, air, dirt and magnetic separator, ansi flanged
CALEFFI 5495 SEP4에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 설치, 시운전 및 서비스 지침 (4 페이지)

페이지 인쇄

SEP4™ combination hydraulic, air, dirt and magnetic

separator

Installation, commissioning and servicing instructions

These items are designed for use in closed hydronic systems. Do not use in plumbing applications. These

items do not meet the low-lead plumbing standards of U.S. and Canada.

Product range

54950 series SEP4™ hydraulic, air, dirt and magnetic separator in steel with union connections,

drain and insulation:

54956 series SEP4™ hydraulic, air, dirt and magnetic separator in steel with union connections,

drain and insulation:

54959 series SEP4™ hydraulic, air, dirt and magnetic separator in steel with union connections,

drain and insulation:

SAFETY INSTRUCTION

This safety alert symbol will be used in this manual to draw attention to safety

related instructions. When used, the safety alert symbol means.

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! FAILURE

TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN A SAFETY

HAZARD.

WARNING: This product can expose you to chemicals including lead, which is known

to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Function

The Caleffi SEP4™ combination separator is a device that

incorporates four critical functions for hot or chilled water sys-

tems. It combines high performance air and dirt (magnetic and

non-magnetic) removal into the hydraulic separation function

which makes the primary and secondary circuits connected to

it hydraulically independent. The SEP4™ features an internal

coalescing element that continuously and automatically eliminates

air micro-bubbles with the simultaneous removal of dirt particles

as tiny as 5 microns. The air discharge capacity is very high, with

the capability of automatically removing all the air present in the

system down to the micro-bubble level. The 4-in-1 high perfor-

mance functionality of the SEP4™ saves system installation and

maintenance costs as there is no need to include separate air

and dirt separators. In addition to removing solid impurities in the

system without isolating the separator or shutting down the sys-

tem, the added powerful removable external magnet belt (union)

or probe(s) (flanged) in the lower body removes up to 100% of the

ferrous impurities, including magnetite, that can form in a hydronic

system. The SEP4™ has 2½ times the ferrous impurities removal

performance of standard air and dirt separators.

connections 1", 1¼", 1½", 2" NPT female union

www.caleffi.com

connections 1", 1¼", 1½", 2" press union

connections 1", 1¼", 1½", 2" sweat union

38804.04

5495 Series