Direct Healthcare Group Bure Rise & Go 사용자 설명서 - 페이지 4

{카테고리_이름} Direct Healthcare Group Bure Rise & Go에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Direct Healthcare Group Bure Rise & Go 12 페이지.
Direct Healthcare Group Bure Rise & Go에 대해서도 마찬가지입니다: 기술 매뉴얼 (12 페이지)

페이지 인쇄

Direct Healthcare Group Bure Rise & Go 사용자 설명서

1. Standing up using the Bure Rise & Go

Because standing up or transporting patients always entails risks we recommend that two

people are always present to assist the user at such times.

1. Fit the harness as low as possible across the hips and bottom with the broad upper part

around the hips and the narrow lower part around the bottom. Attach the strap with the

Velcro fastener and tighten it using the steplessly adjustable safety belt. Note that the lower

part of the harness attached around the patient's bottom can be opened as required, e.g.

for visits to the WC

2. Place the user's legs at a 90˚ angle with their feet on the floor or platform. Adjust the shin

supports to fit the user's shins; remember to avoid pressure on the patellae and patellar

tendons. Refer to page 5 for shin support adjustment.

3. Thread both attachment belts through the walker's frame and the green locking devices.

Make sure the belts are threaded completely through the locking devices. NB: Check

especially that the belts are undamaged. Check that belts are not worn or frayed and that

the holder and straps are NOT bent or crooked. If the holder and belts are crooked (pic

3c-red line) it is a sign that the product has been overloaded, in which case the frame must

be replaced before further use.

4. Connect the power rise harness and attachment belts (that are secured to the walker) and

tighten them using the loops; the belts must be taught on both sides. (see fig. 4a)

BU R E RI SE & G O

DIRECTHEALTHC ARE G RO U P.CO M