Clarion XC6210 사용 설명서 및 설치 설명서 - 페이지 15

{카테고리_이름} Clarion XC6210에 대한 사용 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarion XC6210 18 페이지. Xc amplifiers
Clarion XC6210에 대해서도 마찬가지입니다: 사용 설명서 및 설치 설명서 (10 페이지), 소유자 매뉴얼 (10 페이지)

페이지 인쇄

TROUBLESHOOTING

Problem

No Audio. Amplifier not powering on. (LED turned off)

Solution

Remote turn-on voltage. Check remote connections at amplifier and

source unit.

Blown amplifier fuse. Replace with new fuse (same rating).

Power wires not connected. Check power and ground wiring at amplifier and

at battery.

Speaker leads shorted. Check speaker continuity to ground, it should not show

a common ground.

Speakers not connected or are blown. Check speaker connections at amplifier,

measure coil impedance.

Problem

Audio cycles on and off.

Solution

Thermal protection circuits are shutting amplifier off. Check location for

adequate ventilation; consult an authorized Clarion audio dealer.

Problem

Distorted audio.

Solution

Input Gain is not set properly, or damaged speaker cones. Review Setting Gain;

inspect each speaker. (i.e. check connection, speaker impedance, etc.)

Problem

Audio lacks punch.

Solution

Speakers wired incorrectly, which causes cancellation of bass frequencies.

Check polarity of wires from amplifier to each speaker as defined by the

system design.

XC6210/XC6410