ERGO-INNOVATE EI6181 사용 설명서 - 페이지 10

{카테고리_이름} ERGO-INNOVATE EI6181에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ERGO-INNOVATE EI6181 12 페이지. Full motion mount

3B-2

3B-3

Use the hammer to

knock anchors [A3]

into the wall. Be sure

the anchors [A3] are

seated ﬂush with the

concrete surface.

Step 4

Secure the TV onto the Arm Assembly/Wall Plate [05]

1. Hang the TV onto the front support assembly.

2. Tighten the lock bolts [S] to secure TV onto the arm assembly/wall

plate [05] using screwdriver

HEAVY! You may need

assistance with this step.

Install the arm assembly/wall plate [05] using lag

screws [A1], washers [A2] and anchors [A3]. Tighten

the lag screws [A1] only until the washers [A2] are

pulled ﬁrmly against the wall plate. DO NOT

over-tighten the lag screws [A1].

①

HEAVY! You may need

assistance with this step.

Drill 4 pilot holes using a

3/8 in.(10mm)diameter drill bit.

Make sure the depth is not less

than 2 3/4 in.(70mm). Never drill

into the mortar between blocks.

A2 A1

2 3/4 in.(70mm)

3/8 in.(ø10mm)

33/64 in.(13mm)

Socket Wrench

②

Locking