ACONATIC AN-SP159 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} ACONATIC AN-SP159에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACONATIC AN-SP159 2 페이지. 2.1ch multimedia speaker system
페이지 인쇄
Front panel
1
1.
/SOURCE
2.LED
4.
5.VOL+/-
1.Switch on the unit, it will be in standby state with LED display showing
" --- ".Press the key "
/SOURCE
display showing "BT 18".("BT" means BT mode,"18 " means the present
volume is 18dB,volume range is 0~30dB). Long press the key 3~5 seconds,
the unit will be back to standby state.
2.Press the "SOURCE" key to choose the input modes by the cycle order
of "AUX-DVD-USB/SD-FM". Meanwhile the LED display indicates "Au18".
"Du18". "Ud18". "87.5".
3. In FM mode, short press the key "
step(each time 0.1 MHz). Long press the key 3~5 seconds, the unit will
do automatic cycle search and play the channel after getting the signal.
4. In USB mode, press the key "
5. In USB mode, press "
/SCAN
In FM mode press "
/SCAN
channels
6. Knob operation: turn right/left to increase/decrease the volume based
on the key volume control.
7.Rotary volume knob to increase or decrease the volume. The current
channel won't change when operahing it; the volume level will increase/
decrease from 00 to 30 as user operating it.
System connection diagram
L
Connect the 3.5" stereo cable to the input of the subwoofer,Connect the
3.5 stereo input jack into output of the audio sources,such as MP3,MP4,
walkman,computer etc.
SPEAKER TERMINALS
Connect the satellite and center speaker to the output terminals as
shown in the figure.
* Do not leave objects generating magnetism near the speakers.
5
2
3
4
6
3.
6.
/SCAN
" , it's turned into Aux input mode with
", "
" to search channels step by
","
" to skip to previous or next song.
" you can pause and play control ,
Automatic search and storage of radio
".
NO.4
NO.6
Rear panel
side panel
In use please pay attention to the following items:
R
*if the remote control cannot function, it is because the battery of
remote control has been used up. thank you.
1. ANTENNA
(1)
2. AUX Input
(2)
3. DVD Input
(3)
4. Output R/L
(4)
Connect the satellite speakers.
5. AC IN : AC Power cord
(5)
MIC
NO.5
NO.7