ErgoAV ERDHM1-01B 사용 설명서 - 페이지 14

{카테고리_이름} ErgoAV ERDHM1-01B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ErgoAV ERDHM1-01B 20 페이지. Single monitor desk mount

Supplied Hardware for Step 5

Step 5 Adjust the Gas Spring Tension

Note: Ensure the arm is held in a

horizontal position (parallel to desktop)

during adjustment. Failing to do so may

result in diﬃculty adjusting or potential

damage to the mount.

WARNING!

Gas Spring arm is under pressure and should

be handled with care. Failure to follow the

instructions may result in damage to the

mount and/or personal injury.

Large Allen Key

3/16" (5mm)

[L2] x 1

5-1 If the gas spring arm RISES with the monitor

attached, hold the arm in a horizontal position

while using the large Allen Key [L2] to turn the

adjustment bolt CLOCKWISE, REDUCING the

arm tension.

5-2 If the gas spring arm LOWERS with the

monitor attached, hold the arm in a horizontal

position while using the large Allen Key [L2] to

turn the adjustment bolt COUNTER-clockwise,

INCREASING the arm tension.

Clockwise to

REDUCE tension

Counter-clockwise

to INCREASE tension