AlcoSafe KX6000S-4 소유자 매뉴얼 - 페이지 4

{카테고리_이름} AlcoSafe KX6000S-4에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AlcoSafe KX6000S-4 12 페이지. Premium digital alcohol breath detector

Ready: Wait until 'RDY' (Ready) appears with a

Step 4

single "beep" indicates the unit is ready to use.

Blowing: BLOW STEADILY into the mouthpiece

Step 5

for 5 seconds. "BLOW 1-5... " appears on display

indicating sample being analyzed. Blow until

"beep" sound to signal completion of the test-

ing. A BAC reading will be displayed.

Note: KX6000S-4 allows user to view BAC result in 3-digit or

4-digit of display detail. Refer to 'Set number of display digit'

Read the results: The reading would be in range from 0.000 to

4.000

Step 6

depending on the user pre-set BAC display format.

Note: Refer to 'Set BAC display format' for more about how to change the display format

for the BAC result

Note: It is recommended to WAIT AT LEAST 1 MINUTE between tests for more accurate result

Recall the last test record

User could recall the last test record as below:

On Welcome screen, press Right button to show the cumulative

test count (the number of tests the unit performed).

Press Right button to show the last test record.

Press Right button again to return to Welcome screen.

Note: KX6000S-4 stores a maximum of 64 test records. Refer to 'Display test result records'

for guidance for retrieving previous test records

‰BAC (i.e: 0.000 to 0.400%BAC or 0.000 to 2.000 mg/l)