AerAtron AE+3 43 사용 설명서 - 페이지 6

{카테고리_이름} AerAtron AE+3 43에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AerAtron AE+3 43 18 페이지.

Mounting Metal Hanger Bracket to Ceiling

STEP 1

supply at the main power box. Disconnect power

by removing fuse or turning oﬀ circuit breaker.

OPTION A:

Ceiling Joist

4 timber screws

Install hanger bracket to ceiling joist or concrete ceiling using a minimum of (4) bolts/ screws as provided.

ceiling joists are sound and of adequate size and strength to support a 32Kg (70lbs) load. If a timber frame is to be

added it must be securely nailed or screwed

safety cable within the motor housing opening, approx Ø165mm from the centre of the hanger bracket.

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT.

This fan is to be installed so that the blades are more than 2.3m above the ﬂoor

Connecting Mains Power to Terminal Block

STEP 2

BROWN L

GREEN

BLUE

Hook bolt or

timber screw

Expansion bolt or

timber screw

between two beams.

Mount the hook bolt / timber screws for the

3PIN

CONNECT WITH RECEIVER

OPTION B:

Concrete Ceiling

Ø165mm

4 expansion bolts

FROM HOUSE

(Mains Power)

L LIVE

LIVE

GROUND

NEUTRAL

Ensure