AlcoSense ELITE 사용 설명서
{카테고리_이름} AlcoSense ELITE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AlcoSense ELITE 20 페이지.
- 1. Table of Contents
- 2. Introduction
- 3. Getting Started
- 4. Turning On/Off
- 5. Setting Time
- 6. Changing Units of Measurement
- 7. Activating the Sensor
- 8. Automatic Sensor Clean (ASC)
- 9. How to Establish if an ASC Is Needed
- 10. Quick Sensor Clean
- 11. Performing a Blow Test
- 12. Understanding the Results
- 13. Maintaining Your Alcosense
- 14. Accessories
- 15. Servicing
- 16. Legal
Cover
WARNING: AlcoSense Elite is a sensitive measurement device. Performing a
breath test less than 10 minutes after drinking risks blowing high levels of
alcohol directly from your mouth into the system which could permanently
damage the sensor and cause the system to read inaccurately. For best results
wait at least 30 minutes after drinking or smoking before performing a breath
test. Do not blow directly into the blow hole without a blow tube – this can
damage the sensor and significantly reduce the lifetime of your unit.
1