AerAtron FR3 Series 사용자 설명서 및 설치 설명서 - 페이지 14
{카테고리_이름} AerAtron FR3 Series에 대한 사용자 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AerAtron FR3 Series 18 페이지.
AerAtron FR3 Series에 대해서도 마찬가지입니다: 사용자 설명서 및 설치 설명서 (18 페이지)
Care and Cleaning
Regular cleaning of the Aeratron Ceiling fan blades and fan motor housing is the only maintenance needed.
Due to the self-balancing design, a large build up of dust on blades may create an imbalance in extreme cases
only, causing the blades to wobble during use. This is likely to be more apparent on fans with an extension rod.
Regular cleaning of the blade is recommended to prevent dust from building up.
cleaning your fan, only use a soft brush or lint free cloth to
use water when cleaning your ceiling fan. It could damage the motor or blades and/or
create the possibility of electric shock.
the fan may wobble.
humming sounds during operation. This is especially true in climates with broad temperature and
humidity ranges.
If you experience any flaw in the operation of your fan, please check the points in the Trouble
Shooting section below.
Troubleshooting
Except for items 1 to 3 below, the following require access to
areas of the fan which carry lethal voltage and must be carried
!
out by properly qualified personnel. ONLY points 1 to 3 below
can be carried out by the user.
If the fan does not operate properly, or turns on or off at random.
1.
6.
Check the wire connections to the fan.
7.
If the fan is noisy
8.
Check to make sure that Suspension Ball is located in the slot correctly, and the one screw
9.
10.
11.
If the fan rotates but does not create much airflow
Note:
peak hot water, street lights and so on. These signals may cause an intermittent humming in the ceiling fan.
scratching the finish.
13