Acond Hydromodul Grandis-N SP 설치 매뉴얼 - 페이지 3

{카테고리_이름} Acond Hydromodul Grandis-N SP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acond Hydromodul Grandis-N SP 17 페이지.

1 Explanation of symbols, Documentation validity

1.1 Used symbols

Important information not including either hazards posed to persons or material
values are highlighted in blue with the symbol i. They are separated from text by
commas above and below it.
Warning remarks in the text are indicated by a red warning triangle with a white
exclamation point and enclosed by a frame.

1.1 Documentation validity

The instructions specified herein are valid for Hydromodul ACOND® with ACOND® THERM
regulation with SW versions 150.XX and 160.XX.
If these instructions are not followed during installation, operation and maintenance, then the
obligations of ACOND a.s. stemming from the terms of the warranty shall cease to apply.
ACOND a.s. hereby reserves the right to make changes to any parts of the documentation and
specifications without prior notice.
© 02/2023 Copyright ACOND a.s.

2 Important information

The hydromodule is a separately functional unit, but it can also be installed with an Acond heat
pump if the conditions specified in this manual are met
The device must not operate persons with limited mental abilities or lack of
experience and knowledge (including children) unless they are under
supervision of instructed persons responsible for their safety.

2.1 Function

The Hydromodule heats the heating water using a flow-through heating element and further
forces it to circulate in the heating system by means of a circulation pump or by switching the
three-way valve it can heat DHW in an indirectly heated water tank.
Installation manual
Hydromodul
2