Direct IP Idis DC-D Series 설치 매뉴얼 - 페이지 9
{카테고리_이름} Direct IP Idis DC-D Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Direct IP Idis DC-D Series 18 페이지.
Direct IP Idis DC-D Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지)
페이지 인쇄Factory Reset
Only use the factory reset button to restore the camera
to its factory default settings.
A factory reset will clear all camera settings configured
by the user.
1
Shut off the power supply.
2
Remove the top cover.
3
Press and hold the reset button down
4
Hold the button down and apply the power.
5
Once the device turns back on, wait 5 seconds and
then release the reset button.
6
The device will go through the resetting process and
reboot. All camera settings will be restored to their
factory defaults after the reboot.
It's also possible to do a factory reset by pressing and
releasing the reset button while the camera is turned
on or using the IDIS Discovery program from a remote
location. A factory reset will reboot the system. For more
information on factory reset, refer to the IDIS Discovery
operation manual.
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective installation
manuals.
Product color and design may vary depending on the
model.
Removing the Top Cover
1
Turn the top cover counterclockwise.
2
Remove the top cover.
Part 1 – Introduction
9