ergochair ERGO-RS 5215988 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} ergochair ERGO-RS 5215988에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ergochair ERGO-RS 5215988 4 페이지. Creeper

페이지 인쇄

Ergo-RS™ Creeper

Ergo-RS Safety Information

Always inspect the Ergo-RS Creeper for loose or damaged components prior to each use. If a problem

exists resolve the issue. If the issue cannot be resolved, cease all use and contact your authorized Ergochair

parts provider.

Always be alert and aware of dangers around you while using this equipment.

Only use the Ergo-RS on hard, flat surfaces.

Always sit down on the Ergo-RS gently. Avoid shock loads caused by jumping or falling onto the seat.

Never stand on the Ergo-RS or use it for a purpose for which it was not designed.

Do not allow unsupervised children or persons to use this product.

This product is not a toy. Never use as a skateboard or dolly.

Beware of pinch and crush hazards when adjusting the seat position on this product.

Exercise caution when making seat height adjustments. Keep hands clear when adjusting.

Be aware of the Maximum Weight limit for the Ergo-RS Creeper. Do not remove Vehicle components that,

when combined with your own weight, exceed the maximum weight rating of 350 lbs. / 159 kg.

Replace warning labels that are damaged or illegible.

Always be alert for danger when using the Ergo-RS creeper and working around and under vehicles.

Do not operate your Ergo-RS Creeper if you find maintenance issues or it operates in an abnormal manner,

take it out of service, then contact BendPak Technical Support, email [email protected] or call

(800) 253-2363 ext. 196.

To adjust the Ergo-RS Creeper seat:

1. Pull up on the Seat while holding the Backrest of the

Ergo-RS to free it from the Seat Lock.

2. Push or pull the Seat and the Backrest at the same time

to adjust the height.

3. Push down on the Seat to engage the closest Seat Lock.

To clean the Ergo-RS Creeper seat:

1. While Marine Vinyl is water, stain and abrasion

resistant, it is still a porous material which can

become clogged with dirt. Wash the Ergo-RS Vinyl

frequently using soap and water.

2. Wipe the Vinyl and the Frame of the Ergo-RS dry

after washing.

3. If a more powerful cleaner is required, use a gentle

cleaner similar to Simple Green® or a small amount

of dish soap and a soft bristle brush.

4. Rinse with water and wipe dry.

5. Allow to dry fully.

6. Do not use bleach, vinegar or alcohol based

cleaners. These can dry out the Vinyl and cause

cracking.

7. Store the Ergo-RS in a clean, ventilated and dry

area.

Parts List:

Dimensions:

Quick Start Guide

P/N 5900272 - Rev. A - May 2022

Item

Part

Description

No.

Number

5601339

ERGO-RS BASE FRAME WELDMENT

5601565

ERGO-RS SCISSOR LOCK FRAME WELDMENT

5746506

ERGO-RS SCISSOR LOCK ROD

5746513

ERGO-RS SCISSOR ROLLER ROD

5540128

E RING Ø3/8" OD

5215989

ERGO-RS SEAT ASSEMBLY

5530422

BHSK M10 x 1.5 x 85

5535013

NUT M10 x 1.5 NL

5716064

ERGO-RS LOCK FRAME ROLLER

5716065

ERGO-RS PLASTIC TRAY

5716037

PLASTIC TUBE COVER 25mm

5540113

E RING Ø1/2" OD

5701772

ERGO-RS MAGNETIC TRAY

5737208

ERGO ACCESSORY MOUNT

5716066

ERGO-RS PLASTIC SIDE TRAY

5701777

ERGO-RS CUP HOLDER

5575065

SWIVEL CASTER Ø3 WHEEL, M10 x 25 THREADED STEM

5535051

NUT M10 x 1.5 AN

5545023

WASHER M10 SL

5545341

WASHER M10 x Ø20 FLAT

5530023

BHPS M6 x 1 x 12

5545026

WASHER M6 x Ø12 SL

5530453

BBSL M3 x 12mm

1645 Lemonwood Drive

Santa Paula, CA 93060 USA

(800) 253-2363 bendpak.com

Qty.