Clarion UNGO MS2106 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Clarion UNGO MS2106에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarion UNGO MS2106 16 페이지. Clarion ungo car security system user manual ms2106

3. REMOTE TRANSMITTER

Arm/Lock

Silent Arm

w/ Shift

Auxiliary 1

Auxiliary 3

w/ Shift

The Ungo MS2106 comes with 2 Random Code Remote Transmitters used to

control the system's features. Each time a transmitter button is pressed, the LED

will flash to indicate that a transmission is taking place.

Button 1 Arms the system and locks the doors.*

Button 2 Disarms the system and unlocks the doors.* If the optional Driver's Door

Priority Unlocking feature is installed, pressing Button 2 Disarms the system and

unlocks only the driver's door. Pressing Button 2 again unlocks all doors.

Button 3 Activates the system's auxiliary 1 output (usually used for trunk release).*

Button 4 Activates the system's auxiliary 2 output.*

The Level Shift Button temporarily changes the function of buttons 1-4 allowing

expanded operation and multi-car compatibility. Each time the Level Shift button is

pressed, a new level of commands are accessed up to a maximum of four levels

(Level Shift three times). Note: pages 3 and 4 are reserved for channel expansion

modules or multi-car operation. See your Authorized Ungo Dealer for details.

* Optional feature

Your Ungo Remote Transmitter uses a 12 volt alkaline battery (type 23A), which will

need to be replaced from time to time. Under normal conditions, the battery may

last more than 6 months before it needs replacement.

Transmitter's battery needs replacement, you will notice a decrease in operating

range or a decrease in the brightness of the Transmitter's LED indicator.

To change the battery, remove the 2 screws at the back of the Transmitter and

carefully separate the top and bottom halves of the Transmitter case. Insert the

new battery, carefully observing proper polarity, then replace the cover.

Disarm/Unlock

Silent Disarm

w/ Shift

Level Shift

Auxiliary 2

When your Remote