Clarion UNGO MS2106 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Clarion UNGO MS2106에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarion UNGO MS2106 16 페이지. Clarion ungo car security system user manual ms2106

3.12 Valet Mode

When placed into Valet Mode the security system will be disabled. However, the

optional keyless entry and auxiliary outputs will still function if installed.

To enter the Valet Mode:

1. Be sure the alarm system is disarmed.

2. Press and hold the Valet/Override button.

3. Turn the ignition On.

4. Continue holding the Valet/Override button for 3 seconds.

5. Turn the ignition Off.

• The siren will chirp once.

• The LED will turn On solid indicating the system is in Valet mode.

To exit Valet Mode:

1. Press and hold the Valet/Override button down.

2. Turn the ignition On.

3. Hold the Valet/Override button for 3 seconds.

4. Turn the ignition Off.

• The siren will chirp twice.

• The LED will turn off indicating the system is out of Valet mode.

Press the Trunk button for approximately 3 seconds to open the trunk. This

optional feature may require addtional parts and labor, consult your Authorized

Ungo dealer for more information.

The trunk disarm feature allows the alarm to disarm automatically when the Trunk

button is used to activate the optional trunk release. This eliminates having to

disarm the alarm system prior to activating the trunk release. This optional feature

may require addtional parts and labor, consult your Authorized Ungo dealer for

more information.

Make sure to have the desired transmitters ready and follow the steps below.

To program transmitters:

1. Turn the ignition ON, OFF, ON, OFF, and leave ON.

2. Press and hold the Valet/Override switch for 5 seconds.

• The siren will chirp once.