Acond J1-01 사용 설명서 - 페이지 9
{카테고리_이름} Acond J1-01에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acond J1-01 9 페이지.
페이지 인쇄Operation instructions
SLEEP mode
SLEEP mode can be set in COOLING ,HEATING
This function gives you a more comfortable environment for sleep.
In SLEEP mode,
The appliance will stop operation automatically after operating for 8 hours.
Fan speed is automatically set at low speed.
Set temperature will rise by 1
mode for 1 hour constantly, then keeps steady.
Set temperature will decrease by 3℃ at most if the appliance operates in
heating mode for 3 hours constantly, then keeps steady.
Note: In cooling mode, if room temperature is 26℃or above, set temperature
will not change.
Note: Heating is NOT available for cooling only air conditioner.
Note: Press SUPER ,SMART, MODE,SLEEP or FAN button cancel SLEEP mode.
SUPER mode
SUPER mode is used to start or stop fast cooling or heating.
Fast cooling operates at high fan speed, changing the set temperature
automatically to 18
temperature automatically to 32 ℃.
SUPER mode can be set when the appliance is in operation or energized.
In SUPER mode, you can set airflow direction or timer. If you want to
escape from SUPER mode, press SUPER , MODE, FAN, ON/OFF,SLEEP
or TEMPERATURE SETTING button, the display will return to the original
mode.
Note:
SMART button is not available in SUPER mode.
The Appliance will continue working in SUPER mode for 15 minutes , if you don't
escape from it by pressing any of the buttons mentioned above.
Operation without the remote control
Operation without the Remote Controller
Operation without the Remote Controller
If you have lost the remote control unit or if it is malfunctioning, follow the steps below.
1.How to turn on the air conditioner:
Open the front panel(if necessary), press the ON/OFF button with a ball-point.Then the air conditioner
will automatically select the operation mode according to the room temperature.
2.How to turn off the air conditioner:
Open the front panel(if necessary), press ON/OFF button with a ball-point.
Note: Do not press the ON/OFF button too long, as it may cause the air conditioner to operate abnormally.
Tips for energy saving
If the air inlet and air outlet is blocked it might affect the normal heat exchange of the air conditioner and even cause damage to the
appliance. When the air conditioner is operating in Cooling Mode during the daytime, please use a sun shield or curtains to keep
from direct sunlight from entering into the room.IF the walls and ceiling are irradiated by sunlight, it will take a long time to achieve
the set temperature during cooling opertaion. Clean the air-filters at a certain time(about every two weeks) and keep the air-filters
clean to to ensure normal heat exchange of the indoor unit.
Keep the door and windows well closed when the air-conditioner is running to avoid loss of heat.
SLEEP mode
℃ at most
if the appliance operates in cooling
SUPER mode
℃;Fast heating operates at auto fan speed,changing the set
or DRYING
mode.
7
ON
ON
OFF
ON/OFF
MODE
FAN
SWING
SLEEP
SUPER
SMART
IFEEL
DIMMER
TIMER ON TIMER OFF
CLOCK
fast cooling
ON
OFF
fast heating
ON
OFF