XBOX 360 사용자 설명서 - 페이지 5

{카테고리_이름} XBOX 360에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. XBOX 360 14 페이지. With bluetooth
XBOX 360에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (9 페이지), 사용 설명서 (25 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (2 페이지), 분해 지침 (2 페이지), 빠른 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 소비자 문서 (27 페이지), 사용자 설명서 (31 페이지), 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (6 페이지), 사용자 설명서 (2 페이지), 매뉴얼 (2 페이지)

페이지 인쇄
XBOX 360 사용자 설명서
To enter a TV code:
1 Turn on your TV and point the remote
toward it.
Press and hold the TV and OK buttons
simultaneously for two seconds. All of the
buttons on the remote will then light up for
two seconds, after which only the numeric
TV buttons (1–12) will stay on.
Enter the code for your TV.
4 Press the TV button again to save the code
and exit. All of the buttons on the remote
will blink three times to confirm your
selection.
To scan for a TV code:
1 Turn on your TV and point the remote
toward it.
Press and hold the TV and OK buttons
simultaneously for two seconds. All of the
buttons on the remote will then light for
two seconds, after which only the numeric
TV buttons (1–12) will stay on.
Press the CH/PG button to send a series of
off commands to your TV. Repeat until the
TV turns off.
NOTe
Give your TV enough time to respond to
the off command each time the button is
pressed. Some TVs take more time to react
to off commands than others.
4 Press the TV button to save the code and
exit. All buttons on the remote will blink
three times to confirm the code.
NOTes
• After 30 seconds of inactivity, the remote
will exit the TV programming mode.
Pressing any button besides 0–9 or CH/PG
returns the remote to its original settings.
• If, after setting the TV code, you find
that the remote is not functional or has
incomplete or inaccurate functionality, try
a different code for your TV manufacturer
or scan for another code. To scan for
another code after the TV turns off in
step 3, turn the TV back on, then continue
to press CH/PG for other codes prior to
proceeding to step 4.
• The universal remote works only with TVs,
the Xbox 360 HD DVD Player, the Xbox 360
console, and Windows Media Centre–
based PCs. It does not control VCRs, DVRs,
other DVD players, or audio equipment.