Xerox 3130 - Phaser B/W Laser Printer 빠른 참조 매뉴얼 - 페이지 15
{카테고리_이름} Xerox 3130 - Phaser B/W Laser Printer에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3130 - Phaser B/W Laser Printer 18 페이지. Personal laser printer
Xerox 3130 - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (18 페이지)
페이지 인쇄
Installing the USB Driver in
Windows 98/Me
If you want to print using the USB interface in the Windows 98/
Me, you must first install the USB driver to add the USB port.
To install the USB driver:
1
Connect the printer to your computer using the USB cable
and turn them on. For detailed information, see page 1.9.
2
The Add New Hardware Wizard window appears. Click
Next.
3
Place the CD-ROM in the CD-ROM drive and check Search
for the best driver for your device and click Next.
4
Check CD-ROM drive and click Browse, and choose
x:\USB (where x is the drive letter for the CD-ROM drive).
Click Next.
5
Click Next. The USB driver will be installed.
6
When the installation is completed, click Finish.
7
When the language selection window appears, select the
appropriate language.
Note: If you already installed the printer software, this screen
doesn't appear.
8
Follow the instructions on the screen to complete the
printer software installation. For more details, see
page 1.12.
Notes:
• You can also print from Linux. For detailed information, refer to
the User's Guide of the printer.
• After installation of the software, you can reinstall or remove the
printer software, if necessary. Also, you can change the display
language. For detailed information, refer to the User's Guide of
the printer.
S
U
Y
P
ETTING
P
OUR
RINTER
1.13