Xerox 3130 - Phaser B/W Laser Printer 빠른 참조 매뉴얼 - 페이지 6
{카테고리_이름} Xerox 3130 - Phaser B/W Laser Printer에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3130 - Phaser B/W Laser Printer 18 페이지. Personal laser printer
Xerox 3130 - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (18 페이지)
페이지 인쇄
1.4
S
U
Y
ETTING
P
OUR
Understanding the Control Panel
Button and LEDs
Button or LED
P
RINTER
Description
• If the
LED lights green, the printer is ready
to print.
• If the
LED lights red, the printer is
experiencing an error, such as jammed paper,
the open cover or the empty toner cartridge. For
detailed information, refer to the User's Guide of
the printer.
• In Manual Feed mode, if there is no paper in the
Manual Feeder this LED blinks red.
• If you press the
receiving data, this LED blinks red to cancel
printing.
• If the printer is receiving data or printing the
received data, this LED blinks green.
• If this LED is on, the Toner Save mode is
enabled. If this LED is off, the mode is disabled.
• In Ready mode, press and hold this button for
about 2 seconds to print a demo page, for about
6 seconds to print a configuration sheet, or for
about 10 seconds to print a cleaning sheet.
• In Ready mode, press this button to turn the
Toner Save mode on or off. For detailed
information, refer to the User's Guide of the
printer.
• Press this button each time you load a sheet of
paper in the manual feeder. For detailed
information about manual feeding, refer to the
User's Guide of the printer.
• During printing, press this button to cancel the
print job.
button while the printer is