Xerox 3270 프로그래머 매뉴얼 - 페이지 13

{카테고리_이름} Xerox 3270에 대한 프로그래머 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3270 34 페이지. Xerox electronic documentation laser 3270 programmer's guide

3270 Programmer's Guide
Function Selection via the Line

2.1.2. Removing Temporary Escape Character

If you wish to remove the temporary ESC character so that it may be
used as a printable character, you can define it as a blank as shown
below.
Removing the temporary ESC character .

2.1.3. Defining Permanent Escape Character

The paragraph "Defining a temporary ESC character ", only de-
scribed the temporary use of the ESC character .
If you wish to define and save a permanent ESC character in the
printer, you will have to use Function 48, Select Perma nent Escape
Character, and save the settings in the permanent memory by the
command <ESC> X1 before powering off.
To program Function 48, a temporary escape character has to be
defined first.
You can define the permanent ESC character in two ways:
1. In hex value, e.g. %Y48,09%
2. In apostrophe notation, e.g. %Y48,'<'%
&&??%
%Y48,'<'%
<X1>
NOTE:
If the character used in Function 48, Select Permanent
Escape Character, is different from the one specified
as temporary ESC character, the latest specified char-
acter will take pre cedence immedi a tely.
&&??<blank>
Define temporary escape
Define permanent escape
Store settings
- 13 -