Xerox 3400B - Phaser B/W Laser Printer 네트워크 매뉴얼 - 페이지 12
{카테고리_이름} Xerox 3400B - Phaser B/W Laser Printer에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3400B - Phaser B/W Laser Printer 21 페이지. Network guide
Xerox 3400B - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 참조 매뉴얼 (26 페이지), 브로셔 (4 페이지)
페이지 인쇄Setting the Printer's IP Address
Setting the Printer's IP Address
The factory default method used by the printer to obtain its IP address: The printer first
looks for a DHCP server to assign its IP address. If a DHCP server is not available, then the
printer assigns an IP address for itself.
Automatic IP addressing
The printer automatically assigns an IP address to itself under the following conditions:
The printer has no network connection.
I
The TCP/IP protocol is installed on the computer.
I
The printer connects to the network with no DHCP server available.
I
The IP address has not already been assigned.
I
During the installation process, you can accept the automatically assigned address or
assign a different one. For small networks, the automatically assigned address will work in
most cases. For large networks, see your network administrator to determine if the
suggested address will work.
The Xerox installer for Windows is the recommended method for setting the IP address in
a Windows environment.
Other Methods for setting the printer's IP address
If necessary, you can set a static IP address for the printer using one of the following
methods:
Using the Phaser 3400 web server
I
Using the SetIP utility
I
Using the Phaser 3400 web server to set a static IP address
1.
Open the Internet Explorer web browser (version 4.0 or higher).
2.
For the Address, type http://, then the IP address of the Phaser 3400 printer, then
press the Enter key. For example, if the IP address is 192.25.26.81, type:
http://192.25.26.81
3.
On the main page, click the Admin button, then select TCP/IP.
For Protocol, select Static.
4.
5.
Click the OK button.
8
Phaser 3400 Personal Laser Printer