Xerox 3400B - Phaser B/W Laser Printer 네트워크 매뉴얼 - 페이지 19
{카테고리_이름} Xerox 3400B - Phaser B/W Laser Printer에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3400B - Phaser B/W Laser Printer 21 페이지. Network guide
Xerox 3400B - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 참조 매뉴얼 (26 페이지), 브로셔 (4 페이지)
페이지 인쇄Network Protocols
Determining enabled protocols
All protocols can be enabled and disabled. The Configuration Sheet displays which
protocols are enabled.
Disabling and enabling protocols
After your network configuration is complete, you may want to disable protocols that you
are not using to avoid unnecessary network traffic. You can disable protocols by:
Using CentreWare DP (available July 2001)
I
Using the Phaser 3400 web server
I
Disabling protocols using the Phaser 3400 web server
To disable (or enable) protocols using the Phaser 3400 web server:
1.
Open the Internet Explorer web browser (version 4.0 or higher).
2.
For the Address, type http://, then the IP address of the Phaser 3400 printer, then
press the Enter key. For example, if the IP address is 192.25.26.81, type:
http://192.25.26.81
3.
On the main page, click the Admin button.
4.
Click on the appropriate protocol.
5.
Click to check or uncheck the checkbox to enable or disable the protocol.
6.
Click the Apply button.
Network Guide
Network Protocols
15