Xerox 3400N - Phaser B/W Laser Printer 네트워크 매뉴얼 - 페이지 14
{카테고리_이름} Xerox 3400N - Phaser B/W Laser Printer에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3400N - Phaser B/W Laser Printer 21 페이지. Network guide
Xerox 3400N - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 브로셔 (4 페이지)
페이지 인쇄Setting the Printer's IP Address
Dynamic Host Configuration Protocol
Dynamic Host Configuration Protocol (DHCP) is a system in which UNIX and Windows
NT servers can dynamically allocate IP addresses. The printer is a DHCP client; when the
printer is reset, it receives an IP address from the DHCP server.
Enabling DHCP on the printer
Make sure that the printer's DHCP protocol is enabled. You can check this setting from the
Phaser 3400 web server on the printer by following these steps:
1.
Open the Internet Explorer web browser (version 4.0 or higher).
2.
For the Address, type http://, then the IP address of the Phaser 3400 printer, then
press the Enter key. For example, if the IP address is 192.25.26.81, type:
http://192.25.26.81
3.
On the main page, click the Admin button.
4.
Click TCP/IP.
5.
In the box next to IP Address Assignment Method, choose DHCP.
6.
Click the Apply button.
Note
There are other fields that may need to be changed to match your network, such
as the Subnet Mask and Default Gateway. Consult your network administrator for
details. Be sure to click the Apply button to save settings.
10
Phaser 3400 Personal Laser Printer