Xerox 3400N - Phaser B/W Laser Printer 네트워크 매뉴얼 - 페이지 6
{카테고리_이름} Xerox 3400N - Phaser B/W Laser Printer에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 3400N - Phaser B/W Laser Printer 21 페이지. Network guide
Xerox 3400N - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 브로셔 (4 페이지)
페이지 인쇄Network Printing with Xerox Phaser Printers
Configuration Sheet
The information supplied on the Configuration Sheet is helpful when you are installing
and configuring the printer on a network. It consists of three pages. You can print the
Configuration Sheet:
From the Control Panel
I
Using the Phaser 3400 web server
I
Printing a Configuration Sheet from the control panel
You can use this method even if your printer is not yet configured on the network.
1.
Make sure the printer has been turned on.
2.
Hold down the Print button until all lights blink.
3.
Release the button.
The printer prints the Configuration Sheet.
Printing a Configuration Sheet using the Phaser 3400 web server
With a TCP/IP connection, you can view and change printer options by accessing internal
web pages in your printer. To print the Configuration Sheet:
1.
Open the Internet Explorer web browser (version 4.0 or higher).
2.
For the Address, type http://, then the IP address of the Phaser 3400 printer, then
press the Enter key. For example, if the IP address is 192.25.26.81, type:
http://192.25.26.81
3.
On the main page, click the Print button.
The printer prints the Configuration Sheet.
For more information on the Phaser 3400 web server, see page 14.
Networking software
The Phaser 3400 printer CD-ROM contains software for installing the printer on a network.
The CD-ROM also contains online documentation, printer drivers, and other printer
software. A single integrated installer is used to install printer drivers and other software.
For information on using the installer, see page 4.
2
Phaser 3400 Personal Laser Printer