Xerox 4213 사용자 설명서 - 페이지 7

{카테고리_이름} Xerox 4213에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4213 8 페이지. Xerox 4213: user guide
Xerox 4213에 대해서도 마찬가지입니다: 빠른 참조 카드 (6 페이지)

LJ2D Paper Source commands and the high capacity feeder

Font selection

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE UPDATE

When the optional high capacity feeder is installed and selected

as a paper source through the user interface, the Paper Source

commands as described in chapter 3 of the Xerox 4213 Laser

Printer Programmer Reference may select a different paper tray.

The following table illustrates these differences:

Table 1.

Tray sequence

(through user

interface)

Paper source command effect

HCF

The high capacity feeder is addressed as the default tray and is

accessed by the

source commands work as described in the 4213 Programmer

Reference.

HCF-TRAY1

The high capacity feeder is addressed as both the default tray

and tray 1; therefore, the HCF is accessed by either the

&l0H or the

&l4H) works as described in the 4213 Programmer Reference.

HCF-TRAY2

The high capacity feeder is addressed as both the default tray

and tray 2; therefore, the HCF is accessed by either the

&l0H or the

&l1H) works as described in the 4213 Programmer Reference.

HCF-TRAY1-2

The high capacity feeder is addressed as the default tray no

matter which paper source command (

&l4H) is sent.

If "best fit" does not give the font you expect, choose the font

by font ID or define the correct criteria for the desired font.

Programmer Reference Update

Paper source values with high capcity feeder

selected

&l0H command. All the other paper tray

&l1H command. The paper tray 2 command (

&l4H command. The paper tray 1 command (

&l0H,

&l1H, or