Xerox 4890 Advanced 빠른 참조 카드 - 페이지 2
{카테고리_이름} Xerox 4890 Advanced에 대한 빠른 참조 카드을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4890 Advanced 2 페이지. Highlight color laser printing system
Xerox 4890 Advanced에 대해서도 마찬가지입니다: 빠른 참조 카드 (2 페이지), 빠른 참조 카드 (2 페이지), 컬러 매뉴얼 (32 페이지), 사용자 설명서 (2 페이지)
페이지 인쇄
Adding a new TCP/IP-attached printer
to the print queue list
Follow these steps:
1. From the Servers and Connections dialog box, click [Add
Printer].
2. In the Printer Name text box, type a descriptive name up
to 80 characters long.
3. In the Print Server text box, type the correct print server
name. Contact your System Administrator for this
information.
4. In the Print Queue text box, type the correct print queue
name. Contact your System Administrator for this
information.
5. From the Printer Model: Server Type list box, select the
appropriate printer model and server type.
6. From the Print Manager: list box, select the appropriate
print manager.
7. In the Network Type area, select TCP/IP.
8. Click [OK].
Adding a new Novell NetWare-
attached printer to the print queue list
Follow these steps:
1. From the Servers and Connections dialog box, click [Add
Printer].
2. Make sure that Novell NetWare is selected under
Network Type.
3. Select [Browse...].
4. Scroll down to the appropriate server under the listed
shared printers.
5. Select the server of your choice, then select [OK].
6. Select the queue of your choice, then select [OK].
The Add Printer window displays the Print Server and
Print Queue of your choice.
Note: You may be asked to install a printer driver for the
selected queue.
7. From the Printer Model: Server Type list box, select the
appropriate printer model and server type.
8. In the Network Type area, select Novell NetWare.
9. In the Printer Name text box, type a descriptive name up
to 80 characters long.
10. Click [OK].
11. The Servers and Connections window displays your
selections.
Select [Close].
The newly added printer displays in the Printers area of
the dialog box.
Setting the default printer
Follow these steps:
1. From the Servers and Connections dialog box, select a
printer from the Printers list box.
2. Click [Set Default Printer].
Removing a printer from the setup
Follow these steps:
1. From the Servers and Connections dialog box, select a
printer from the Printers list box.
2. Click [Delete Printer].
3. At the confirmation window, click [OK].
1999, 2000 by Xerox Corporation. All rights reserved.
XEROX
Xerox DocuPrint
Network Printer Series
Submitting Your Jobs
from Windows NT 4.0
(Quick Print)
Quick Reference Card
Refer to this card for quick reference when using the print job
submission utility to publish documents on the Xerox
DocuPrint Models 180/4050/4090/4635/4850/4890/96/92C
NPS.
This reference card supplements the Xerox DocuPrint
Network Series Guide to Submitting Jobs from the Client and
should not be considered a replacement for other Xerox
DocuPrint Network Printer Series documentation.
Version 7.1
August 2000
721P87561