Xerox 5400DX - Phaser B/W Laser Printer 기술 지침 - 페이지 2

{카테고리_이름} Xerox 5400DX - Phaser B/W Laser Printer에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 5400DX - Phaser B/W Laser Printer 5 페이지. 1000-sheet stacker
Xerox 5400DX - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (40 페이지), 매뉴얼 (11 페이지), 설치 지침 (2 페이지), 종이 매뉴얼 (2 페이지)

페이지 인쇄

Xerox 5400DX - Phaser B/W Laser Printer 기술 지침

Step 3

Rotate the cartridge to the fill plug

side. Repeat Step 2 to remove the

cartridge pin. Separate the cartridge

sections and put aside the toner

unit. (See Photo 5&6)

Photo 5

Photo 6

Step 4

Remove the screws holding the

metal drum axial and remove drum

axial. Remove screws holding white

plastic drum with contact and

remove white drum axial. (See

Photo 7&8)

Photo 7

Photo 8

Photo 9

Photo 10

Photo 11

Photo 12

Photo 13

PHASER 5400 Technical Instructions

Step 5

Remove the drum and set aside in a light pro-

tected area.

Step 6

Remove PCR roller from saddle blocks. Set

PCR roller aside. (See Photo 9)

Step 7

Remove the screws to the wiper blade and lift

out wiper blade. Remove waste toner using a

vacuum or dry, compressed air.

(See Photo 10)

Step 8

Clean wiper blade with a soft dry cloth or dry,

compressed air.

Apply padding powder to the blade edge and

reinstall. (See Photo 11&12)

Step 9

Clean PCR saddle blocks with cotton swab

and Anhydrous Isopropyl Alcohol. Clean PCR

using a dry, soft, lint-free cloth.

NOTE: If needed, de-ionized water can be

used to clean the PCR.

(See Photo 13&14)

Photo 14