Xerox 6180N - Phaser Color Laser Printer 보안 매뉴얼 - 페이지 27

{카테고리_이름} Xerox 6180N - Phaser Color Laser Printer에 대한 보안 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6180N - Phaser Color Laser Printer 38 페이지. Color laser printer
Xerox 6180N - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 사양 시트 (2 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (28 페이지), 설치 매뉴얼 (2 페이지), 릴리스 노트 (2 페이지), 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (37 페이지), 매뉴얼 (34 페이지), 매뉴얼 (34 페이지), 시작하기 매뉴얼 (34 페이지), 사용자 설명서 (32 페이지), 설치 및 운영 매뉴얼 (8 페이지), 평가자 매뉴얼 (16 페이지), 사양 (4 페이지)

페이지 인쇄
Xerox 6180N - Phaser Color Laser Printer 보안 매뉴얼

Limiting access

IP Filtering

Security Guide
2. Select the ADS tab, and enter in the fully qualified domain
name of the ADS domain.
3. Click "Join..." button to join the Xerox FreeFlow Print Server to
the ADS domain specified.
NOTE: If DNS is not enabled, the "Join..." button will not be
available.
Map the ADS groups to the Print Server user groups
From the Setup menu, Users & Groups option, select the ADS
Groups tab. A member of the System Administrators group can
specify, view and edit the mapping of ADS Groups to the three
Xerox FreeFlow Print Server user groups (Administrators,
Operator, Users) permitted to log on to the printer.
Log on to the system with ADS user names
From the Logon menu, select ADS for authentication, then log on
to the system with your ADS user name and password.
NOTE: For this feature to work, Administrators must ensure that
DNS is enabled, the Xerox FreeFlow Print Server is configured to
join the ADS domain, and ADS groups are mapped to the Xerox
FreeFlow Print Server user groups.
Troubleshoot ADS
Refer to the online help feature when troubleshooting ADS.
The Xerox FreeFlow Print Server provides options that allow the
administrator to block or limit access to the system.
IP Filtering allows the administrator to block IP addresses and
provides access to services such as: LPR, IPP, HTTP, HTTPS,
SMB Printing, Raw TCP Printing, and FTP Connections.
The administrator can limit access through the Xerox FreeFlow
Print Server interface [Setup > IP Filtering menu option]. The filter
allows the blocking of specific IP addresses or a range of
addresses from accessing the system. Available options include:
Enable All Connections, Disable All Connections, Enable
23