Trays
This section covers:
I
Loading paper in Trays 1-3 — see page 2.
I
Loading paper in the Multi-Purpose Tray — see page 6.
I
Using custom size paper — see page 8.
For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,
refer to the Supported Papers section of the Trays and Paper Guide on the Interactive Documentation
CD-ROM.
Instructional videos for loading trays are available on the Interactive Documentation
CD-ROM or the Xerox web site at:
You can also refer to the labels inside the printer for paper loading instructions.
Note
Do not load a tray that is currently being used for printing.
You MUST set the paper type in the printer's front panel any time you add paper to the printer. If you
change paper types, take a moment to ensure that the front panel values agree with the paper you have
loaded. If you fail to do this, you can damage the printer's fuser.
Loading paper in Trays 1-3
Note
If you change the type of paper, you MUST
specify the type on the front panel of the printer.
Caution
Phaser® 6200 Transparency film is designed specifically to work with this printer's oil-less
fuser. Using non-Phaser 6200 Transparencies might result in poor image quality and might
damage the fuser. Damage caused by using non-Phaser 6200 Transparencies is not covered
under the warranty, service agreement, or Total Satisfaction Guarantee. To order
Phaser® 6200 Transparencies, visit the
DO NOT load Phaser® 6200 Transparency Film in Trays 2 or 3; use Tray 1 or the
Multi-Purpose Tray instead.
Caution
DO NOT load card stock, glossy coated paper, photo paper, envelopes, labels, business
cards, greeting cards, CD/DVD labels, and CD/DVD inserts in Trays 1-3; use the
Multi-Purpose Tray instead.
To load paper in Trays 1-3:
Copyright © 2002 Xerox Corporation. All Rights Reserved.
Phaser® 6200 Color Laser Printer
www.xerox.com/officeprinting/6200support/
Phaser® 6200 Supplies and Accessories web
OK
6200-46
site.
2
페이지 인쇄