Xerox 6200DX - Phaser Color Laser Printer 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Xerox 6200DX - Phaser Color Laser Printer에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6200DX - Phaser Color Laser Printer 12 페이지. Specialty printing phaser 6200 series
Xerox 6200DX - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 네트워크 매뉴얼 (50 페이지), 설정 및 빠른 참조 매뉴얼 (49 페이지), 종이 매뉴얼 (27 페이지), 지원 매뉴얼 (26 페이지), 문제 해결 매뉴얼 (42 페이지), 사양 (12 페이지)

페이지 인쇄
Xerox 6200DX - Phaser Color Laser Printer 설치 지침 매뉴얼
Xerox Phaser 6200 Color Laser Printer
Maintenance Firmware Release Installation Instructions
Notes:
The printer firmware image installed by the "P6200B_Update.ps" and
"P6200N_DP_DX_Update.ps" files is identical; only the firmware
update programs that write the flash ROM memory are different. Two
different firmware update files are required because of the different
memory requirements for the two models.
Using the incorrect firmware update file cannot change the printer
configuration.
5.
Select the appropriate firmware update in the open file dialog that appears, and
press the "Open" button. The firmware update is sent to the printer.
6.
No further user action is required to complete the firmware update process. The
printer will restart automatically when the update process is complete, and the
printer will be ready for use.
Warning: Do not attempt to cancel the firmware update process once it has
started, or turn off the printer power during the update. The
printer might be left in an inoperable state that requires service.
Notes:
The printer prints a warning page the printer should not be
interrupted during the firmware update process. The front panel LCD
displays the progress of the firmware update. The printer
automatically restarts after the firmware update process is complete.
The printer's configuration and settings are not altered by this
firmware update.
Page 12 of 12