Xerox 6200DX - Phaser Color Laser Printer 지원 매뉴얼 - 페이지 16

{카테고리_이름} Xerox 6200DX - Phaser Color Laser Printer에 대한 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6200DX - Phaser Color Laser Printer 26 페이지. Specialty printing phaser 6200 series
Xerox 6200DX - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 네트워크 매뉴얼 (50 페이지), 설정 및 빠른 참조 매뉴얼 (49 페이지), 종이 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (12 페이지), 문제 해결 매뉴얼 (42 페이지), 사양 (12 페이지)

페이지 인쇄
Xerox 6200DX - Phaser Color Laser Printer 지원 매뉴얼
I
Do not place the printer in line with the cold air flow from an air conditioning system.
I
Place the printer on a level, solid surface with adequate strength for the weight of the machine. The
base printer weight without any packaging materials is approximately 36 kg (80 pounds).
I
The printer is heavy, and must be lifted by two people. The illustration below shows the proper
technique for lifting the printer.
Note
Do not use the Multi-Purpose Tray to lift the printer.
I
Follow the recommended procedure when moving the printer from one location to another. You
can find this procedure in the Moving Guide printable page located in the Setup Guide of the
Interactive Documentation CD-ROM.
I
Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a warning symbol. These
areas may be very hot and could cause personal injury.
I
Wait 10-15 seconds between switching the printer off and on.
I
Keep hands, hair, neckties, etc., away from the exit and feed rollers.
While printing, follow these safety guidelines:
I
Do not remove the paper source tray that you have selected in the driver or front panel.
I
Do not open the covers while printing.
I
Do not move the printer while printing.
Phaser® 6200 Color Laser Printer
36 kg
80 lbs.
6200-70
User Safety Summary
13