Xerox 6200DX - Phaser Color Laser Printer 문제 해결 매뉴얼 - 페이지 13

{카테고리_이름} Xerox 6200DX - Phaser Color Laser Printer에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 6200DX - Phaser Color Laser Printer 42 페이지. Specialty printing phaser 6200 series
Xerox 6200DX - Phaser Color Laser Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 네트워크 매뉴얼 (50 페이지), 설정 및 빠른 참조 매뉴얼 (49 페이지), 종이 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (12 페이지), 지원 매뉴얼 (26 페이지), 사양 (12 페이지)

페이지 인쇄
Xerox 6200DX - Phaser Color Laser Printer 문제 해결 매뉴얼
The

Color Registration Menu

colors are properly aligned.
Steps:
You can adjust the settings from -7 to +7 units. (left to right). See the images on the left. 0 is always the printer's current
color registration setting.
1.
From the printer's front panel
2.
Scroll to the
Color Registration Menu
3. To adjust the color registration, select
a.
Using the page just printed, select the number for the heaviest
Cyan area.
b.
The Cyan lines above that number should form a straight line with the black lines.
c.
Enter that number by using the Up Arrow or Down Arrow keys and press OK.
4.
Repeat steps
a
through
Note:
The adjustment value entered is stored and is now the new 0 positon for that color. Repeat the process until all
three colors are aligned at the 0 position.
5.
Reprint this page to verify the adjustment.
Page 1 of 1
PHASER
allows you to adjust the printer's cyan, magenta and yellow against black to ensure that the
Support
Menu, scroll to
and press OK to print this page.
Adjust Cyan
c
for
Adjust Magenta
and
6200 COLOR PRINTER
®
Improve Print Quality?
and press OK.
Adjust
Yellow.
Color Registration Menu
and press OK.