Xerox 8200B - Phaser Color Solid Ink Printer 네트워킹 설정 매뉴얼 - 페이지 26

{카테고리_이름} Xerox 8200B - Phaser Color Solid Ink Printer에 대한 네트워킹 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 8200B - Phaser Color Solid Ink Printer 47 페이지. Phaser color printer
Xerox 8200B - Phaser Color Solid Ink Printer에 대해서도 마찬가지입니다: 빠른 매뉴얼 (37 페이지), 설치 (1 페이지), 사양 (4 페이지)

페이지 인쇄
Xerox 8200B - Phaser Color Solid Ink Printer 네트워킹 설정 매뉴얼

Windows 2000/XP Network

This section provides installation and troubleshooting steps for Windows 2000/XP:
Preliminary steps — see page 21.
I
Quick CD-ROM install steps — see page 21.
I
Other methods of installation — see page 22.
I
Quick install steps (Microsoft TCP/IP protocol) — see page 22.
I
Quick install steps (AppleTalk protocol) — see page 23.
I
Windows 2000/XP troubleshooting (TCP/IP) — see page 24.
I
Windows 2000/XP troubleshooting (AppleTalk) — see page 25.
I

Preliminary steps

The preliminary steps given below must be accomplished for all printers regardless of the method that is
selected.
1.
Print the Configuration Pages and retain them for reference.
2.
Verify that the printer is plugged in, turned on, and connected to an active network.
3.
Verify that the printer is receiving network traffic by monitoring the LED's on the back of the
printer or on the CentreDirect External Print Server. When the printer is connected to a
functioning network receiving traffic, its link LED is green, and its traffic LED (amber) is flashing
rapidly.
4.
Proceed to the Quick CD-ROM install steps or Other methods of installation sections for the
installation method desired.

Quick CD-ROM install steps

The Xerox installer for Windows is on your printer's software CD-ROM. A single integrated installer is
used to install printer drivers and other software.The Xerox installer automatically performs printer
installation tasks and creates a printer. In most cases, you are required only to make a few installation
choices, clicking Next to move from screen to screen.
To install the drivers and other software:
1.
Insert the printer's software CD-ROM into your computer's CD-ROM drive.
a.
If the Windows autorun feature is enabled, the CD-ROM launches automatically.
b.
If the Windows autorun feature is disabled, double-click My Computer, double-click the CD
icon to access the CD-ROM, then double-click startup.exe.
2.
Follow the on-screen instructions to complete the installation.
Copyright © 2002 Xerox Corporation. All Rights Reserved.
Phaser® 8200 Color Printer
21