Xerox DocuColor 5750 서비스 매뉴얼 - 페이지 11
{카테고리_이름} Xerox DocuColor 5750에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 5750 40 페이지. Digital color printer / copier
Xerox DocuColor 5750에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (9 페이지), 보충 설명서 (8 페이지), 시작하기 매뉴얼 (46 페이지), 보충 설명서 (10 페이지), 매뉴얼 (9 페이지)
페이지 인쇄
Status
Code
05-111
The control logic sensed a timing problem with the ADF Registration Off Jam Check.
Initial action:
Check the paper path for pieces of ripped paper or other foreign objects.
Inspect the Platen Belt for contamination, excessive wear or damage.
Check the Platen Glass for contamination (REP 5.2).
Open and close the ADF left cover. Check for binding or other mechanical problems with the left cover.
Observe the UI and make sure the customer message to close the left cover appears in a timely fashion.
If the problem still exists:
Place a service call.
05-115, 116
The control logic sensed a timing problem with the ADF Exit Sensor On Jam Check (05-115) or the ADF Exit Sensor
Off Jam Check (05-116).
Initial action:
Check the exit paper path for pieces of ripped paper or other foreign objects.
Inspect the Platen Belt for contamination, excessive wear or damage.
Check the Platen Glass for contamination (REP 5.2).
Verify that the Exit Chute Cover is installed correctly.
Check the Static Eliminator for damage and correct installation.
NOTE : Certain types of coated originals may leave a residue on the platen glass when heated by the expo-
sure lamp. This residue may cause the original to stick to the platen glass and not feed out of the ADF To
avoid this problem make only a few copies of coated originals at a time or do not use the ADF when copying
coated originals
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-11
Fault Code Procedures