Xerox DocuColor 5750 서비스 매뉴얼 - 페이지 27
{카테고리_이름} Xerox DocuColor 5750에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 5750 40 페이지. Digital color printer / copier
Xerox DocuColor 5750에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (9 페이지), 보충 설명서 (8 페이지), 시작하기 매뉴얼 (46 페이지), 보충 설명서 (10 페이지), 매뉴얼 (9 페이지)
페이지 인쇄
Status
Code
08-385
The control logic sensed a timing error between the TR0 (Transfer Roll Zero) sensor and the IOT PWB.
Initial action:
Check the TR0 (Transfer Roll Zero) Sensor Actuator for damage (located inside and at the front of the CTR
(Charged Transfer Roll) Assembly).
If the problem still exists:
Place a service call.
08-900
The control logic sensed a paper static jam.
Initial action:
Contact Building Maintenance and have them verify the proper voltage at the machine plug.
Check Tray 1, 2, 3 or 4 for a cracked or broken tray stop.
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
Verify Heavy Weight Paper and Transparencies Control Panel settings are correct, if applicable.
If the problem still exists:
Place a service call.
09-363
The control logic sensed a failure of the Developer Rotary Home Sensor to detect the position of the Developer
Rotary.
Initial action:
Verify that the Drum unit is firmly seated and secured (REP 5.4).
Inspect the installation of the Developer Units (REP 5.7). Make sure all screws are secure and that the
clamps are in place
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-27
Fault Code Procedures