Xerox DocuColor 5750 시작하기 매뉴얼 - 페이지 31

{카테고리_이름} Xerox DocuColor 5750에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 5750 46 페이지. Digital color printer / copier
Xerox DocuColor 5750에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (9 페이지), 보충 설명서 (8 페이지), 서비스 매뉴얼 (40 페이지), 보충 설명서 (10 페이지), 매뉴얼 (9 페이지)

페이지 인쇄

Adding "_print" or "_hold" to the name identifies the queue type associated with the

icon.

13. When the Add Printer Wizard asks if you want to print the test page, click Yes. After

the test page prints, click Yes again (even if the test page prints incorrectly).

14. Go to Section 5.5.3, on page 33 to setup the printer.

1. If there are no other PostScript printers installed on the workstation, install a dummy,

local, PostScript printer from your operating system install media:

a. Start the Add Printer Wizard by clicking on Start, Settings, Printers and Add

Printers.

b. When the Add Printer Wizard prompts for a Local Printer or Network Printer,

select Local Printer and click Next.

Follow the prompts. When Add Printer Wizard prompts you for the

Manufacturer and Model of the printer, choose HP and HP LaserJet III Si

PostScript. This copies the non-U.S. English, printer driver software to your

system.

2. Insert the Splash CD-ROM that shipped with the color server into your client

workstation's CD-ROM drive.

3. Open the WINVIEWER folder on the CD-ROM.

4. Double-click on Setup. When Setup starts, a dialog box appears that prompts you to

select a language.

5. Select the English language from the pull-down list and click OK. The Install Shield

Wizard starts.

6. Install the Viewer by following the Install Shield prompts.

7. When the Viewer installation is complete, remove the CD-ROM from the workstation's

CD-ROM drive.

0015647-0001 February 18, 1999

SplashM310

M310_hold

M310_print

SplashM410

M410_hold

M410_print

Figure 20: Color Server Queues

Getting Started Guide

page-31