Xerox DocuColor 5750 시작하기 매뉴얼 - 페이지 36
{카테고리_이름} Xerox DocuColor 5750에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 5750 46 페이지. Digital color printer / copier
Xerox DocuColor 5750에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (9 페이지), 보충 설명서 (8 페이지), 서비스 매뉴얼 (40 페이지), 보충 설명서 (10 페이지), 매뉴얼 (9 페이지)
페이지 인쇄
Getting Started Guide
8. Click OK. The Advanced PostScript dialog box closes, but the PostScript tab is still
displayed.
9. Switch from the PostScript tab to the Device Options tab by clicking on Device
Options. The tab shown in Figure 27 appears.
Print features
Change setting
Installable
options
Change Setting
pull-down list
10. Scroll down and select SpotMatch.
a. If the M Series server is a model M210 or M310, set the SpotMatch option to
disabled. This option must be set to disabled because the M210 and M310 do not
support the SpotMatch feature.
b. If the M Series server is a model M410, set SpotMatch to the desired option
(disabled or enabled).
11. Configure all of the Installable options:
a. Select the M Series Features option from the Installable Option list. Choose either
M200, M300, or M400, depending on the model of the color server.
b. Select the Xerox 5750/Acolor 620 Support option from the Installable options list.
This option enables/disables 12in x 18in, Postcard, and Tray 4 support. This
option also disables/enables Group in Sorter and Group in Sorter Reverse, which
are not supported by the Xerox 5750/Acolor 620 copier. Xerox 5750/Acolor 620
Support is enabled (Yes) by default.
If your color server is connected to a Xerox 5750/Acolor 620 copier, use the default
(Yes).
If your color server is connected to a Xerox 5790/Acolor 935 or Xerox 5799/Acolor
936 copier, use the Change Setting pull-down list to set this option to No.
page-36
Figure 27: Device Options Tab
0015647-0001 February 18, 1999