Xerox Phaser 860 네트워킹 설정 매뉴얼 - 페이지 13

{카테고리_이름} Xerox Phaser 860에 대한 네트워킹 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 860 42 페이지. Color printer
Xerox Phaser 860에 대해서도 마찬가지입니다: 트레이 모듈 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (1 페이지), 신속한 릴리스 매뉴얼 (1 페이지), 보충 설명서 (1 페이지), 보충 설명서 (11 페이지), 브로셔 및 사양 (4 페이지), 메뉴 맵 (1 페이지), 설정 및 빠른 참조 매뉴얼 (36 페이지), 설치 매뉴얼 (1 페이지), 서비스 매뉴얼 (11 페이지)

TCP/IP Configuration

The Configuration Page reports important information that you will need for TCP/IP

configuration. For information on printing a Configuration Page, see page 2.

Choose the procedure appropriate for your environment:

For installation on workstations when print jobs are to be sent through a print server,

see Installation on Workstations for Client-server Printing on page 9.

For installation on a workstation for peer-to-peer printing, see Installation on

Workstations for Peer-to-Peer Printing on page 9.

The Xerox Installer for Windows automatically performs the following functions to set up

your printer:

Locates your printer on the network.

Suggests an IP address for the printer if one has not already been assigned (for

example, from the front panel or by DHCP). You are given the opportunity to accept

the automatically assigned address or assign a different one. For information on other

methods of setting the printer's IP address, see page 13.

Windows 95/98/ME—Installs PhaserPort for Windows (if not already installed).

PhaserPort for Windows is a Xerox port monitor for printing over Windows 95/98/ME

TCP/IP peer-to-peer networks.

Windows NT—Installs Microsoft TCP/IP Printing Services (if not already installed).

Installs the driver.

Creates a printer in the Printers window.

Networking Setup Guide

TCP/IP Configuration