Xerox Phaser II DX 지침서 - 페이지 2
{카테고리_이름} Xerox Phaser II DX에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser II DX 25 페이지. 4-mbyte ram simm installation
페이지 인쇄4-Mbyte RAM SIMM Installation — (4690F4M)
Static electricity precautions
Phaser PX
Phaser PXi
Leave the printer plugged into its power outlet. This preserves a
ground path for static discharges.
Touch the printer's bare metal frame often to discharge static
electricity from your body.
Handle the circuit board(s) by their edges only.
Do not lay the board(s) on a metal surface.
Make the least possible movements to avoid generating static
electricity.
Avoid wearing nylon or polyester clothing; they generate static
electricity.
1.
Power down the printer. Do not unplug the printer; this preserves a
ground path to dissipate static charges. Disconnect the host interface
cables.
2.
Remove the printer's upper half cover by first lifting the rear corners
of the cover and then the front corners.
2